EAC Panel Mount Connectors

Home>Browse by Category>Connectors>General Connectors>AC Power Connectors>EAC Panel Mount Connectors

Two and three-pin/contact grounding primary power receptacles are designed to meet IEC/EN 60320, as well as applicable UL, CSA and VDE specifications, as indicated. Receptacles feature choice of short, standard or long solder lugs or FASTON type terminals. Receptacles snap-in from the front or screw mount from the front or rear of panel per model specification. Receptacles have orbitally riveted lugs or single piece terminals for superior mechanical/electrical connections. Extended socket versions permit minimum behind-panel depth.

Key Features

icon_options_blue

Receptacles feature choice of short, standard or long solder lugs or FASTON type terminals

icon_certified_blue

UL recognition, CSA approval and VDE certified for high quality safety standards

icon_switchcraft_blue

Switchcrafts power inlets are made in USA with the best materials to the highest quality standards

ELECTRICAL

Insulation Resistance: 2 million megohms @ 500 V DC.
Dielectric Strength: 1500 V (rms).
Arcing Test: Meets UL 498 Standard.

MECHANICAL

Solderability Standard: Meets MIL-STD-202, method 208, EIA RS-186-9E.

ENVIRONMENTAL

Thermal Range: -55 C to +65 C (except EAC45x series).
Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E, method 5.

MATERIAL

Shell:

EAC227X, EAC309X, EAC327X: Black Polyester, UL94-V0, yellow card E45329
EAC301X: Black Polyester, UL94-V0, yellow card E45575
EAC233, EAC233T, EAC305, EAC325, EAC333, EAC333S, EAC333T: Black Polycarbonate, UL94-V0, yellow card E121562
EAC323, EAC405 series, EAC409 series, EAC411 series: Black Polycarbonate, UL94-V0, yellow card E178485

Pins, Contacts and Terminals: Plated copper alloy.
Description:

EAC227--2-pin male receptacle with standard solder lug terminals. Panel mount from front or rear using screws. UL,CSA
EAC233--2-pin, male receptacle with right-angle housing for PC mount. PC terminals project .130 inch (3.3 mm) to extend through PC board. Rear of panel mount. Two, .136 inch (3.45 mm) diameter holes permit fastening to PC board; two additional .136 inch (3.45 mm) holes are for fastening to panel or chassis, if required. UL,CSA
EAC233T--Similar to EAC233, but with slots through mounting flanges for PC mount using twist tabs. UL,CSA
EAC305--3-contact female receptacle. Front mount with two, #4 screws or .094 inch (2.38 mm) diameter rivets (not supplied). UL,CSA
EAC309X--3-pin male receptacle with standard lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied). UL,CSA
EAC311X--3-pin male receptacle with FASTON style terminals that can also be soldered. Mounts from front or rear of panel with two, #5 screws or .125 inch (3.18 mm) diameter rivets (not supplied). UL,CSA
EAC323--3-pin male receptacle with short solder lug terminals. Extended socket housing (mounting flange on rear of receptacle) provides more behind panel clearance. Mounts with two, #4 screws or .094 inch (2.38 mm) diameter rivets (not supplied). UL,CSA, VDE
EAC325--3-contact female receptacle with short solder lug terminals. Extended housing (mounting flange on rear of receptacle) provides more behind panel depth. Mounts with two, #4 screws or .094 inch (2.38 mm) diameter rivets (not supplied). UL,CSA
EAC327X--3-pin male receptacle, panel mount from front or rear using screws, standard solder lugs. UL,CSA
EAC333--3-pin, 10A, 250V male receptacle with right-angle housing for PC mount. PC terminal and hole mounting details are the same as for EAC233. Ground pin is integral with ground solder lug on rear of receptacle. UL,CSA, VDE
EAC333S--Similar to EAC333, but with two, snap-in retainers through mounting flanges for PC mount. UL,CSA, VDE
EAC405--3-contact female receptacle with standard solder lug terminals. Snap-in panel mounting. Available for 0.030, 0.040, 0.050 or 0.060 panel thickness. UL,CSA
EAC409--3-pin male receptacle with standard solder lug terminals. Snap-in panel mounting. Available for 0.030, 0.040, 0.050 or 0.060 panel thickness. UL,CSA, VDE
EAC411--3-pin male receptacle with FASTON style terminals that can also be soldered. Snap-in panel mounting. Available for 0.030, 0.040, 0.050 or 0.060 panel thickness. UL,CSA, VDE