|
AAA Series
|
|
|
|
Newly designed AAA Series XLR connectors feature a two piece design with integral strain relief for quick assembly. The pin insert is pre-loaded into the front shell, further reducing assembly time. A flat area on the handle is designed to accommodate custom labeling options.
|
|
|
|
EN3 Series 2-8 Cable Mount
|
|
|
|
Utilizing an integral O-Ring/gasket, EN3® connectors are available in 2-18 pins/sockets in the same housing size, bayonet locking, cable end, in-line, panel mount,right angle panel mount, solder, pc, crimp contacts, caps. Meets enclosure rating IP66/IP68 and NEMA 250 when mated or covered.
|
|
|
|
|
|
Micro-Con-X Connectors
|
|
|
|
Utilizing a separate o-ring, Micro-Con-X® connectors are available up to 3-#20 pins/sockets, 4-#22 pins/sockets, and 7-#26 pins/sockets. Meets NEMA 6P when mated.
|
|
|
|
Shielded Mini Con-X
|
|
|
|
Rugged metal field installable, EMI/RFI Shielded Mini Con X® connectors are available up to 6-#16 pins/sockets and 8-#20 pins/sockets. Meets IP66/IP68 when mated.
|
|
|
|
SC700CT A/V Direct Box
|
|
|
|
The 700 Series A/V Direct Box converts the outputs of equipment such
as MP3 players, laptops and DJ mixers to balanced, mic level signals
that can be connected to audio consoles, mic preamps and house sound
systems. A premium, fully shielded isolation transformer protects the
purity of your sound from ground loops while providing a truly uncolored
audio output. All Stereo inputs on the SC700CT are summed to mono
and output to a single 3-Pin XLR connector.
|
|
|
|
MMVP Micro Video Patchbays
|
|
|
|
Switchcraft® introduces the MMVP Series of high density, high definition video patchbays. The design of our micro video jack allows for 48 channels / 96 patchpoints in a 1RU, 19” rack. All Micro Video Patchbays meet SMPTE 424M specifications utilizing industry standard DIN 1.0 / 2.3 rear terminations.
|
|
|
|
Sealed Power Jacks & Plugs
|
|
|
|
Sealed power plugs and jacks provide a great waterproof alternative to the standard power plug and jack. With an IP 68/ NEMA 250 (6P) rating this series of product is perfect for any type of environment.
|
|
|
|
Mic Splitters/ DI Boxes/ I-O Throughs/ Accessories
|
|
|
|
The 800 Series Instrument Direct Box converts the unbalanced outputs
of musical instruments to balanced, mic level signals that can be
connected to audio consoles and mic preamps. Dual 1/4” thruputs enable
connection to multiple devices such as an amp and a tuner, two amps, etc.
A premium, fully shielded isolation transformer protects the purity of your
sound from ground loops while providing a truly uncolored audio output.
|
|
|
|
900 Series Instrument Direct Boxes with Remote Ground Lift
|
|
|
|
The 900 Series is a revolutionary new concept in DI technology. For the first time, the ground lift switch can be controlled remotely using +48V phantom power from the console! The unit can be operated in two modes. Manual mode enables users
to control the ground lift switch from the DI using the toggle switch. Phantom mode allows users to control the ground lift switch remotely using +48V phantom power from the console. When phantom power is engaged, an LED is illuminated indicating that the ground is lifted. When phantom is turned off, the LED turns off indicating that the DI is grounded.
|
|
|
|
Shielded Mini XLR Connectors
|
|
|
|
Shielded Tini-QG® (Mini XLR) connectors provide the same great quality as the rest of the Tini-QG® series with the added benefit of shielding from EMI and RF interference. Available in 3-8 contacts.
|
|
|
|
3.5mm Inline Jacks
|
|
|
|
3.5 mm inline jacks with sturdy solid metal housing. Rated to 5,000 insertion/ withdrawal cycles. Two piece design simplifies terminations. Mates with 35HD series locking or non-locking plugs
|
|
|
|
Mil-E-Qual Mate First Break Last
|
|
|
|
First Mate Last Break Contact Mil-E-Qual® is ideally suited for those applications where a ground connection is critical to proper operation. Utilizes #16 and #12 size contacts. Available in straight cable plug and box receptacle only. UV inhibitors in the plastic and an IP 67 rating make this a perfect product for outdoor waterproof applications.
|
|
|
|
Modular DB25 Breakout Cable Ends
|
|
|
|
The easiest way to configure your I/O connections without having to replace core cable runs. Connect any of our Modular DB25 Breakout Cable Ends to any length of
DB25 to DB25 cable. The result is a custom built DB25 breakout cable or 8-channel snake with premium Switchcraft® connector ends.
|
|
|
|
|
|
|
|
DIN 1.0 / 2.3 Feed Thru Patchbay
|
|
|
.jpg)
|
1RU patchbay loaded with 96 of our premium DIN 1.0/2.3 feed-thru connectors. Ideal for extension and ease of access to the I/O on large format HD routing systems. Bring all of the hard to reach DIN 1.0/2.3 connections on your router to an easier access point in your rack.
|
|
|
|
RMAS1 Series Single Channel Mic Splitter
|
|
|
|
The Switchcraft® RMAS1 is a passive 3-way transformer isolated microphone splitter ideal for sending a single balanced audio input to 3 unique destinations. The RMAS1 is available with either Jensen or premium custom transformers to provide 100%
isolation from noise and a truly uncolored audio output.
|
|
|
|
|
|
Sealed D-Sub Cable Mount
|
|
|
|
waterproof sealed D-Sub Connectors meet IP67 rating. Connectors are available in solder cup, male and female versions. Backshell kits available for cable diameters 0.138-0.276 in (3.51-7.01 mm)
|
|
|
|
Sealed D-Sub Panel Mount
|
|
|
|
waterproof sealed D-Sub Connectors meet IP67 rating. Rear mounting panel connectors fit into standard D-Sub holes. Connectors are available in solder cup, male and female versions. D-Sub solder cup contacts accept wire with 2 mounting screws.
|
|
|
|
|
|
|
|
RJ45 Field Installable Panel Housing Assembly
|
|
|
|
RJ45 Weathertight Connectors are sealed to IP67 & IP68 NEMA 250 (6P) when mated. CAT 5E or CAT 6 available in shielded or unshielded versions. Feed through or IDC panel terminals for easy field installation.
|
|
|
|
AudioStix
|
|
|
|
AudioStix are the newest additions to our expanding line of premium pro audio products. They can be used as stand-alone adapters, rear mounted into our modular QGPK Series rack panels, or permanently installed into any number of custom racks and wall plates. AudioStix are made in the USA.
|
|
|
|
Sealed Mini-USB
|
|
|
|
Data-Con-X™ connectors from Conxall provide a great way to seal and standardize all of your data connections. These field installable sealed mini-USB connectors are sealed to a level of IP-68. They are also made from a UV resistant thermoplastic in order to reduce the affects of sunlight on the assembly
|
|
|
|
EN3 Series Right Angle PC Board Panel Connectors 2-18 Contacts
|
|
|
|
Utilizing an integral O-Ring/gasket, EN3® right angle panel connectors are available in 2-18 pins/sockets in the same housing size with bayonet locking. Right angle PC board mount contacts. Meets enclosure rating IP66/IP68 and NEMA 250 when mated or covered.
|
|
|
|
|
|
EN2™ Sealed Connectors
|
|
|
|
Utilizing an integral O-Ring/gasket, EN2™ connectors are available for 2-3 #20 pins/sockets, 4 for #22 pins/sockets and 5-7 for #26 pins/sockets in the same housing size, bayonet locking, cable end and panel mount. Meets enclosure rating IP68 and NEMA 250.
|
|
|
|
EN2 Sealed Cord Connector
|
|
|
|
Utilizing an integral O-Ring/gasket, EN2™ connectors are available for 2-3 for #20 pins/sockets, 4 for #22 pins/sockets and 5-7 for #26 pins/sockets in the same housing size, bayonet locking, cable end and panel mount. Meets enclosure rating IP68 and NEMA 250. Note: does not include cable
|
|
|
|
EN2 Sealed Panel Connector
|
|
|
.jpg)
|
Utilizing an integral O-Ring/gasket, EN2™ connectors are available for 2-3 for #20 pins/sockets, 4 for #22 pins/sockets and 5-7 for #26 pins/sockets in the same housing size, bayonet locking, cable end and panel mount. Meets enclosure rating IP68 and NEMA 250.
|
|
|
|
Data-Con-X Sealed USB Type A & B Connectors
|
|
|
|
Data-Con-X™ Sealed USB Type A & B Connectors are sealed to IP67 & IP68 NEMA 250 (6P) when mated. Feed-thru termination is available on the panel for easy field installation and easy to assemble. Available in a quick connect bayonet or a threaded style interface. This is a RoHS compliant assembly.
|
|
|
|
Sealed Power Jack Molded Cable
|
|
|
|
Sealed power jack molded cable assembly allows for cable to cable mating with field installable sealed power plugs or molded cable sealed power plugs.
|
|
|
|
High Amperage Sealed Power Jacks & Plugs
|
|
|
|
High Amperage Sealed Jacks & Plugs are sealed to IP68, NEMA 250 (6P) when mated. Automatic switch over from Ac to DC permitted by sleeve shunt spring. Lock and non-locking versions available. Up to 11A current rating (carry).
|
|
|
|
High Amperage Non-Sealed Power Jacks & Plugs
|
|
|
|
High Amperage Non-Sealed Power Jacks & Plugs are available in locking or non-locking versions. Automatic switch over from AC to DC permitted by sleeve shunt spring. Up to 11A current rating (carry).
|
|